Xhorse VVDI BCM2 Solder-Free Adapter is used to read Audi's encrypted BCM computer data. There is no need to solder anymore while reading AUDI BCM2 module, therefore, it is friendly to the people without soldering techniques. Being solder-free it creates a safer environment and also protect users’ money by avoid damaging AUDI BCM2 modules.
Xhorse all key lost cable for Ford is used to connect to Xhorse VVDI key tool plus pad for key programming, when all keys are lost and the alarm is on, which works for Ford / Lincoln cars. With its help, you do NOT need to turn off the battery over and over again. Since the manufacturer is Xhorse, of course, the good quality is guaranteed
Xhorse XDRT20 Frequency Tester for Infrared Signal Detection Support 315Mhz/ 433Mhz/ 868Mhz/ 902Mhz
Xhorse XM38 Toyota smart key add key for all key lost requires data collection and calculation, and now you can use the VVDI Key Tool Plus to connect to the Internet for data processing to generate keys. This function needs to collect data from the ECU on the vehicle, the original OBD 8A Adapter cannot perform this function, it needs to be equipped with this new Xhorse 8A smart adapter.
8PCS VVDI MB Tool EIS/ELV Test Line for W164/ W166/ W204/ W205/ W222/ W212/ W221/ ISM 7-G, can work With VVDI MB Tool, No need to have car for test,
Xhorse XDNP30 Bosh ECU Adapters works with VVDI Key Tool Plus/ VVDI Mini Prog, it supports N55 N20 B38 B48 and more than 80% F Series type.
XHORSE XDNPR8GL MQB-RH850/V850 Adapter for VVDI Key Tool Plus, it Seamlessly read MQB48, MQB49, and 5C dashboards without invasive modifications, streamlining the process and preserving dashboard integrity.
When the W202/W204/W207 ESL damaged, you will need to use the VVDI MB NEC ELV adapter to works together with VVDI MB BGA tool to renew, then use MB BGA tool to reprogram key.
Xhorse XDNP11GL is used to do CAS3/CAS3+ units for BMW with solder-free adapter, compatible with Xhorse MINI PROG, KeyTool Plus, VVDI Prog. It is a perfect choice for users who have a job that is 50-70 miles away from a rework station.
Xhorse MVCI Pro J2534 is a passthru cable for multi-brand car software including Toyota, Honda, Ford, Mazda, Subaru, VAG etc. It is compatible with ODIS, TIS, HDS, SSM4, Ford IDS, Mazda IDS etc software. It is the perfectly replace original VAS6154
Xhorse XDMPR8GL MQB-RH850/V850 Adapter Exclusive for Xhorse Multi-PROG
Xhorse FCA 12+8 Cable for Chrysler/ Dodge/ Jeep Work With Key Tool Plus
Xhorse Smart Watch (SW-007) is a multi-functional watch which is designed by Xhorse.lt can be used as a replacement remote smart key to control a vehicle, start and stop the car, open and close the trunk, lock and unlock doors, as well support for panic function.
Xhorse XDNP45GL Solder-Free Adapter for AUDI A6/Q7 J518 Compatible with Mini Prog/ Key Tool Plus
XHORSE XDKP36GL Nissan 16+32 Gateway Adapter is designed to be used with Nissan Sentra 2021+ and other models 8th Generation with B18 Chassis. Access the secure gateway on Nissan Sentra 2020 and newer models. This Xhorse Nissan 16+32 ByPass Cable is compatible with VVDI Key Tool Plus.
Xhorse solder-free adapters and cable package works with Mini Prog and Key Tool Plus for programming without soldering.
Xhorse XDNP12GL BMW CAS4 CAS4+ Solder Free Adapter for Mini Prog/ VVDI Key Tool Plus
Mercedes All EZS Bench Test Cable 7pcs Full Package for W209/ W211/ W906/ W169/ W208/ W202/ W210/ W639 Work with VVDI MB Tool
Xhorse XDKP30 Multi-Function Adapter is developed especially for connecting old adapters such as BOSH ECU adapter, BENZ EZS adapters, etc. to KEY TOOL PLUS and MINI PROG. This could help avoid purchasing those new accessories coming with KEY TOOL PLUS again and make full use of your old ones.